Projectors or underwater spotlights that beautifully illuminate a basin and its surroundings, it undeniably brings an extra aesthetic dimension to an inground pool! So no question to let a blown bulb spoil the harmony of our space-swimming…
Change the bulb of a spot of pool: different stages
When the light bulb of a spot of pool no longer works, should be changed quickly. Here’s how in 5 steps at http://www.toughestflashlights.com/2016/12/new-led-light-bulbs/:
1 you must start by cut the power to the lighting of the pool. Even if the pool is on the (safe low voltage) 12V, better secure the building site at 100%!
- remove the optical unit of the spot of its location. Most of the time, spots fit together, but sometimes also need to unscrew. Once removed, pull on the cable to the spot to get it out of the water, and it is placed on the rim of the pool.
- unscrew the optical spot in order to disconnect the bulb from the holder. This last being fragile, for not damaging it, it is advisable to place it on a cloth or towel.
- before changing the bulb of the spot, a quick glance on the gasket located between the bulb and the support is recommended. If it is cracked, worn, stretched or slightly melted, we took the opportunity to change. Similarly, as algae love settle around the support and in the niche in which is located the spot, a small cleaning!
- replace the bulb, replace the optical block of the spot, the re – immersed and well wrap the cable bulb before putting it back in its recess under the water. If one has difficulty in many re – recessed spot of pool in its place, he may have to go for a walk in the water!
Change the bulb of a spot of pool: essential precautions
Turn off the power before changing the bulb of a spot of pool isn’t the only rule of security! To make the replacement of the bulb without concern or incident, here are a few precautions always follow:
If the optical cable is not long enough to be able to be completely out of the water, you must bring down the water level of the pool in order to change the bulb dry.
If our pool spots are old enough and that it is not easily désemboîtent, it is better to be two take it apart.
Above all, we turn ever on a bulb of pool water to test! Lamps immersed heating quickly, if not is not cooled quickly by the water in the pool, she may Grill… and he will have to start all over again!
If after replacing the bulb, the spot still does not work, the problem is probably with the transformer… It will therefore check its voltage with an electric Tester to see where the problem lies.
Even if they are not complicated, the manipulations necessary to change the bulb of a spot of pool require a minimum of DIY and electrical knowledge. It is strongly advisable to call a professional if our electricity skills are limited, so that it performs the repairs in the rules of the art, and safe!
Light Bulbs That Change Colors Equivalent Mini Multi Color …
Light Bulbs That Change Colors Online Shop Led Bulb Lamp …
Light Bulbs That Change Colors Led Light Bulb 3 Color …
led color changing chandelier – wrozkagdynia.info
Changing Mirror Changing Mirror Interactive – sydhavn.info
L.E.D. Swimming pool or Spa light bulb- Color Changing LED …
PureLine LED Pool Bulb Color Changing 120V 18W
color changing pool light bulb
Swimming Pool SPA 20w LED 120V IGS54-120LL Color Changing …
120V/12V 35W Color Change Led Pool Light Bulb For Pentair …
Top 8 for Best Led Swimming Pool Light Bulb 2018
120V Color Changing 18w Replacement LED Swimming Pool …
PoolBright color changing LED replacement swimming pool …
252 LED 120 Volt Color Changing Replacement Swimming Pool …
120V 35W RGB Colors Changing Swimming Pool LED Light Bulb …
Top 20 Best Changing Pool Lights 2018
2 PACK- Aqualuminator Above Ground Pool Replacement Bulbs …
How to Replace a Pool Light Bulb
Best to Buy® 12V Color Changing 54Watt Pool Lights LED …
WYZM 120V 35W Color Changing Swimming Pool Lights LED …